anyone know how to reset the clear blue easy fert. monitor?

reilly17

i recently went of bcp. we are talking about ttc #3 this summer. i fig. that i better get that cbefm out and try to reset the thing. it worked the first time using it with ds #2.  anyone know how to reset it?  tia.

ds#1 10/20/06

ds#2  3/19/08

sunshiny79

I grabbed this from google...hope it helps.

If you have purchased a used CBEFM or if it has been a long time since you have used yours, you may want to reset the memorybanks to a clean slate. I got these off of the internet a year or so ago when I bought mine. Hope this can help someone.

Please read all instructions over before attempting to re-set the monitor!

1. With the monitor OFF, place a clean unused test stick with the cap on (remove plastic cap from one end and snap it onto the other end of stick) in the test stick slot of the monitor.

2. *Make sure it snaps in.*

3. Press and hold the "m" button. Continue pressing the "m" button while turning the monitor ON.

(NOTE: Do not take finger off "m" button until these directions say to do so.)
4. It will show you the "remove the test stick" sign. (a flashing test stick with an arrow pointing right) Continue pressing "m".

5. Keep pressing the "m" button and in about 20 seconds, you will see a screen full of symbols. The screen will look as if it is going crazy and will be full of pics.

6. Remove the test stick first and then QUICKLY release your finger from the "m" button. All of the memory should be wiped out.

7. Your screen should display a flashing "m" and one or two dashes. If it does not, it will probably show a "1" and a non-flashing "m". If it does, then you need to repeat the process so it shows the flashing "m" and dashes.

8. Start using the monitor on CD 1 as per the instruction booklet.