Babies: 0 - 3 Months

leaking Dr. brown bottles

my bottles seem to all of a sudden be leaking when i feed DD.  they didn't leak b4 this week.  i have it really tighly closed too... ne1 else with this issue?
Warning No formatter is installed for the format bbhtml

Re: leaking Dr. brown bottles

  • I called Dr. Browns. A batch I got from Target did this. They sent me new ones. The BPA free ones leaked.
  • Loading the player...
  • Mine started leaking too all of a sudden this week!
  • so strange. ..... yeah i have the bpa free ones. 
    Warning No formatter is installed for the format bbhtml
  • I am a bad mom and have some that are not BPA Free. I have never had issues. They were on clearance at Target for $1.00 a bottle. So for an 80oz bottle that was good. All the BPA free ones are a softer plastic and suck.
  • Mine leak too! I e-mailed the company.
  • this is from dr b's website

     

    Is that a leak?
    Because the Dr. Brown's bottle is fully-vented it allows positive-pressure flow, similar to breastfeeding. This is essential for the baby to feed without having to suck against a vacuum. Under certain conditions the breastmilk or formula can exit through the vent. For example if the liquid is overheated the expanding air inside the bottle pushes the liquid through the vent causing leakage. Or if the bottle is shaken to mix formula, which we do not recommend, the liquid may enter the vent.

    When liquid gets into the venting system, it can sometimes leak out around the nipple collar.
    This can happen three ways:

    1. If you heat your bottle with the nipple collar securely in place, the liquid will be forced up into the vent as it expands. To avoid this, either heat the bottle without the nipple collar or loosen the nipple collar one-half turn after heating to allow the pressure to equalize. Then, re-tighten it before feeding.
    2. If you use powdered formula and mix it by shaking the bottle, liquid can get into the vent. The solution for this is to mix the formula by stirring it with a spoon rather than by shaking.
    3. If you overheat the liquid in the bottle, the vapor will rise and condense in the vent. To prevent this, avoid warming the liquid beyond body temperature.
    Warning No formatter is installed for the format bbhtml
This discussion has been closed.
Choose Another Board
Search Boards
"
"