Last night DH and I messed around with the Sonoline B doppler we bought (previous pregnancy). After about 15 minutes I found our little running horse but the actual BMP wouldn't come up on the screen. We could hear it though.
At our last doctors appointment DH recorded the heartbeat so we played it off his phone to compare and it sounded very similar (like a little gallop). Anyone else hear it but not have the numbers show up on the screen or are we nuts?
Re: Doppler Q for anyone with success
Sometimes I have to gently press on LO to get him/her to move around so that I can get a good read. But it works most of the time. On my Sonoline there are 3 choices for settings in measuring the heart rate. I can't remember what exactly each one means, but I think one is an average, one you measure like a stop clock, and one is the actual beats as it is reading them... I always stick with the first mode and the HB is always around 150's.
Hope that helps.
IUI#3 - Jan 6 IVF#1 -5/18 - stims start (225 gonal f, 75 menopur, 5 lupron) ER 5/29 - 14R, 11M, 7F. 6/1 - Transferred 2 8cell embryos (grade 1 and 2). 8dp3dt +HPT, Beta#1 - 92, Beta #2 - 174, Beta#3 - 614, Beta#4 - 2010. 6wk u/s - TWINS! Baby A 114bpm, Baby B 112 bpm
DD 12/20/99, DS 12/14/12, M/C 9/2014, M/C 1/2015
Born via emergency c-section - 8lb, 19.75 in, 100% stubborn BFP Chart
8 cycles of unmedicated trying = BFP!! - EDD 1/10/18
*Waiting for Baby Eags 2.0*;
V|V TSP V|V
It sounds like you may be in mode 3 which will not show a reading. Check to make sure you are in mode 1. If it is in mode 1 you may want to try changing the batteries in case they are losing power. The only other possibility I can think is if you could not get a steady enough reading for the doppler to register it. I had that the other day - LO kept moving so I would pick up the hb and then lose it almost instantly.
The day the Bump died - Jasper is wise