Baby wearing/ring sling question

Re: Baby wearing/ring sling question

• jday1229

  August 2012

  The trick is to get her knees higher so the weight is not actually being put on the rails of the sling but on the middle where it creates the cradle. I would usually get it tight and in a good position and then be able to give a little slack on the bottom rail once the weight was supported properly.

  Somethikng like this

  https://zolowear.com/Images/Wearing/illustrations/snuggle3a.jpg

   

  Gabriel :: Born on his due date - 9/19/09 :: 9lb 8oz, 21"Birth Story

  Report0 Reply
• Loading the player...
• hey_little_bird member

  August 2012

  i have a similar issue. see, it's that other leg, the one that's not showing, that is the one i think is getting pinched.

  sometimes if i pull the bottom rail too tight DD cries, but when i loosen it, she stops. so obviously it does pinch!

  Warning No formatter is installed for the format bbhtml

  Report0 Reply
• sadsadie

  August 2012

  Maybe try another type of carrier? 

  

  Report0 Reply
• Todd&Laura

  August 2012

  jday1229:

  The trick is to get her knees higher so the weight is not actually being put on the rails of the sling but on the middle where it creates the cradle. I would usually get it tight and in a good position and then be able to give a little slack on the bottom rail once the weight was supported properly.

  Somethikng like this

  https://zolowear.com/Images/Wearing/illustrations/snuggle3a.jpg

   

  That is exactly right!! It takes some messing with it to figure it out, but you can do it!M 

  

  Report0 Reply