Clearing a CBEFM?

BabyRN2009

Does anyone know how to clear a CBEFM of all past info?  I got one off of Ebay, but it is used and so I want to clear it if possible. I've seen other posts of people talking of clearing their CBEFM but no one telling HOW to do it. 

Does anyone know??

THANKS!!

SweetieD21

How to Start Using Your Monitor Again

It is important that you read the following notes first.
? Check that you are still suitable to use the Clearblue? Easy Fertility Monitor (refer to pages 5 and 6).
? Reprogramming your Monitor erases all the previous information stored about your cycles.
? The procedure is not reversible - previously stored information cannot be retrieved.
? You will need a Test Stick to reprogram your Monitor.The Test Stick can be previously used or unused.Therefore, you may wish
to save a used Test Stick from your last cycle for when you are ready to reprogram your Monitor.
? Ensure working batteries are in your Monitor prior to reprogramming (refer to page 8).
Reprogramming Procedure
1. Ensure your Monitor is switched off.
2. Insert a Test Stick into the Test Stick Slot, checking the position carefully, as there will be no symbol to tell you that the Test Stick
is correctly inserted.
3. Press and hold the m Button while you complete steps 4, 5 & 6 below.
4. Press the On/Off Button to turn your Monitor on.
5. will be displayed.* Continue to hold the m Button and leave the Test Stick in position.
6. After approximately 15 seconds, all symbols on the Display Screen will be shown. will again be displayed.
The m Button can now be released and the Test Stick removed.
7. You should see the following symbols on your Display Screen ?-- m.?Your Monitor is now reprogrammed and ready for use.
*If is not displayed, the Test Stick is not inserted correctly.

BabyRN2009

THANK YOU!!!

CareBear2005

Just wanted to say that YES, those instructions work! I bought mine off ebay and the seller actually cleared it for me, but I did it again to be on the safe side and it was perfectly fine!